Search results

This study aims to compare the influence of different solid lubricants on the friction stability of a non-asbestos disc brake pad.

Three brake pads were developed using three lubricants, namely, non-asbestos brake pad with sulfide mix (NASM), non-asbestos brake pad with bismuth sulfide (NABS) and non-asbestos brake pad with molybdenum disulfide (NAMO). Sulfide mix was indigenously developed by physically mixing friction modifiers, alkaline earth chemicals and various metallic sulfides homogeneously dispersed in graphite medium. The physical, chemical, mechanical and thermal properties of brake pads were characterized as per industrial standards. The tribological performances were studied using the Chase testing machine as SAE-J661-2012. The worn surface of the pads was studied using scanning electron microscope to analyze the dominating wear mechanism.

NASM was excellent in fade as well as wear resistance. NABS was better from a wear point of view, but fade resistance was moderate despite its higher cost. NAMO fared average in fade and wear despite its excellent dry lubricating properties. NASM was excellent in terms of fade as well as wear resistance.

Among the selected metal sulfides, the indigenously developed sulfide mix was better than the other two sulfides, which indicates that the synergetic effect of metal sulfides was always preferable to the individual sulfides.

This paper aims to discuss the influence of graphite with varying purity on the tribological performance of brake pads.

Three distinct brake pads were created within the scope of this experiment by varying the graphite purity without affecting the other components. The brake pads were made using a traditional manufacturing procedure, and industry standards were used to test the chemical, physical and mechanical properties of the newly produced brake pad. A full-scale inertia brake dynamometer was used to determine the material’s tribological characteristics. The worn surfaces of the brake pads were examined using a scanning electron microscope.

The test results indicate that brake pads containing 99% pure graphite (artificial grade) displayed good physical, chemical and mechanical features, such as consistent friction and a reduced rate of wear because of the lower impurity level, which eliminates frictional undulations.

This paper discusses the influence of graphite purity on the tribological performance of brake pads by modifying tribofilms and reducing friction undulations.

This study aims to discuss the impact of using bio-polymer (kraft lignin) in the formulation of passenger vehicle disc brake pads (as a substitute for cashew nutshell liquid [CNSL]-based friction dust) and investigate the characteristics of the pads.

Within the scope of this investigation, three different brake pads were generated by altering the biopolymer-lignin content in conjunction with the friction dust from CNSL without modifying the other components. The brake pads were created in accordance with industry-standard practices. Industrial standards were used to evaluate the newly created brake pad’s thermal, physical and mechanical qualities. The tribological properties of the materials were determined using a full-scale inertia brake dynamometer. The scanning electron microscope examined the worn surfaces in conjunction with elemental mapping.

The test findings suggest that the brake pads filled with biopolymer-lignin and CNSL-based friction dust (as a partial replacement 50%) exhibited excellent thermal, physical, mechanical characteristics, as well as steady friction and low wear rate.

A bio-polymer (kraft lignin) in friction composites has the potential to produce eco-friendly brake pads and improve the tribological performance of its copper free-composition, which might be used to replace CNSL-based friction dust in friction composites by addressing the issues raised in this work.

Vehicle weight reduction represents a viable means of meeting tougher regulatory requirements designed to reduce fuel consumption and control greenhouse gas emissions. This paper aims to present an empirical and comparative analysis of lightweight magnesium materials used to replace conventional steel in passenger vehicles with internal combustion engines. The very low density of magnesium makes it a viable material for lightweighting given that it is lighter than aluminium by one-third and steel by three-fourth.

A structural evaluation case study of the “open access” Wikispeed car was undertaken. This included an assessment of material design characteristics such as bending stiffness, torsional stiffness and crashworthiness to evaluate whether magnesium provides a better alternative to the current usage of aluminium in the automotive industry.

The Wikispeed car had an issue with the rocker beam width/thickness (b/t) ratio, indicating failure in yield instead of buckling. By changing the specified material, Aluminium Alloy 6061-T651 to Magnesium EN-MB10020, it was revealed that vehicle mass could be reduced by an estimated 110 kg, in turn improving the fuel economy by 10 per cent. This, however, would require mechanical performance compromise unless the current design is modified.

This is the first time that a comparative analysis of material substitution has been made on the Wikispeed car. The results of such work will assist in the lowering of harmful greenhouse gas emissions and simultaneously augment fuel economy.

The purpose of this paper is to deal with the tribological study on the brake pads developed using various purity-based graphitized graphite.

This paper deals with developing copper-free brake pads by using graphite as a key lubricant produced using a graphitization process with purity percentages (85, 90 and 95%). The brake pads were developed using traditional manufacturing processes and evaluated for their physical, chemical, thermal and mechanical properties as per industrial standards. Fade and recovery characteristics were analyzed using a full-scale inertia brake dynamometer as per JASO-C-406. The scanning electron microscope was used to analyze the worn surfaces of the brake pads.

The testing findings reveal that the brake pads with 95% graphitized graphite showed better shear strength with good adhesion levels and lesser density, hardness, acetone extract value, loss on ignition and higher porosity. Effectiveness studies of brake pads with graphite (95% graphitized) showed better results at higher pressure speed conditions than others because of better plateau formation and adequate lubrication.

This paper discusses graphitized graphite of different purity influences brake pad's tribological performance by modifying tribo-films and reducing friction undulations.